Customized Polished H6 Solid Carbide Rods For Endmills With
Dia12*95mm
| Material | cemented carbide (WC+Co) |
| Size | φ12*95mm or others available |
| Size Tolerance | h6 or as customer's request |
| Color | As picture |
| Grade | ZF06X |
| Grain Size | Fine grain size 0.6μm |
| Application | for cutting tool |
| Processing Treatment | Clean ground and polished or as customer request. |
| Product Features | Long life,good wear resistance and high hardness. |
| Certification | ISO9001:2015 |
| Composition | WC - 92% ; Co -6%; TaC- 2 % |
Production Features
1. we are using 100% WC and the raw matearils of CO.
2. High hardness HRA89-93 ,good bending strength TRS
2800-4200.N/mm2
3. Long probation,stamping.
4. Has good wear resitance.
5. Professional manufacturer for more than 10years experience.
6. ISQ 9001-2015 Quality Control System.
7. With the HIP sintered technology,the structure of tungsten
carbide is more uniform,more dense,the TRS can be raised more than
20%
We make tungsten carbide rods extruded or pressed.
Diameter from 0.35mm to 50mm,
length in 330mm or 340mm.
Application of tungsten carbide rod
Used for making various kinds of carbide solid tools and cutting
tools, such as drills, end mills, thread taps, rotating file,etc. A
good material for general-purpose. Suitable for machining carbon
steel, cast irons, stainless steel, heat-resistance steel, nickel
based alloys and titanium alloys.
SomeCustomized size list
Size range(DiaXL mm) | Tolerance |
D(blank, mm) | D (ground, mm) | L(mm) |
| Dia3x40/50/60/65/70/90... | +0/+0.3 | h6/h7 | 0/+1 |
Dia4*30/40/45/50/60/90... | +0.3/+0.4 | h6/h7 | 0/+1 |
Dia5*10/20/25/30/40/95.... | +0.3/+0.6 | h6/h7 | 0/+1 |
Dia6*20/30/50/60/95/100.. | +0.3/+0.6 | h6/h7 | 0/+1 |
| Dia7*20/25/30/35/50/60/75.. | +0.3/+0.6 | h6/h7 | 0/+1 |
| Dia8*30/40/45/75/95/100... | +0.3/+0.6 | h6/h7 | 0/+1 |
| Dia10*65/70/75/90/95... | +0.3/+0.6 | h6/h7 | 0/+1 |
| Dia14*65/75/90/95/120.... | +0.3/+0.6 | h6/h7 | 0/+1 |
For more size, please kindly contact us. we are able to custom-made
according to drawings. |
Carbide Rods Grades for Cutting Tools
| Grade | ISO Grade | WC% | Co% | Grain Size μm | Hardness (HRA) | Density g/cm3 | T.R.S. N/mm2 | Application |
| YG6X | K10 | 94 | 6 | 0.6-0.8 | 14.9 | 92 | 2000 | Suitable for processing Chilled cast iron, heat-resistant alloy
steel, and fine process of common cast iron |
| YL10.2 | K25-K35 | 90 | 10 | 0.6-0.8 | 14.5 | 92.5 | 3800 | Wear resistance and strength comparatively higher,suitable for PCB
micro drills,for making drills,end mill,reamer,taps,burrs etc. |
| ZF06X | | 92 | Co-6% TaC-2% | 0.6 | 14.8 | 91 | 1300 | suitabble for cutting tools |
Carbide Rods Grades for Moulds/Dies
| Grade | ISO Grade | WC% | Co% | Grain Size μm | Hardness (HRA) | Density g/cm3 | T.R.S. N/mm2 | Application |
| YG8 | K30 | 92 | 8 | 1.2 | 14.6 | 89 | 2320 | Suitable for the roughening of cast iron and light alloys and also
for the milling of cast iron and low-alloy steel. |
| YG6 | K20 | 94 | 6 | 1.2 | 14.9 | 89.5 | 2150 | Good Wear resistance, used for hard wood,processing original
wood,aluminum section bar,brass rod and cast iron. |
| YG15 | | 85 | 15 | 1.6 | 14.1 | 86.5 | 2400 | Medium grain, for mining tools, cold heading and punching dies |
| YG20 | | 80 | 20 | 1.6 | 13.7 | 85 | 2500 |
suitable for stamping dies such as screw, watch parts
|
| YG20C | | 80 | 20 | 1.8-2 | 13.6 | 82 | 2200 | Suitable for colding heading dies, stamping dies such as shaft
,standard parts |
Cutting steel class grade
| Grade | ISO Grade | Density g/cm3 | Hardness HRA | T.R.S N/mm2 | Application |
| YT5 | P30 | 11.50-13.20 | 90.0 | 1750 | Suitable for heavy duty cutting of steel and cast steel and for a
low-speed and medium-speed and a big feed-rate roughing operation
under unfavorable machining conditions |
| YT14 | P20 | 11.20-11.80 | 91.0 | 1550 | Suitable for semi-finishing and finishing machining of steel and
cast steel, using a medium feed-rate |
| YT15 | P10 | 11.10-11.60 | 91.5 | 1500 | Suitable for semi-finishing and finishing machining of steel and
cast steel and a medium feed-rate and a rather high cutting speed
is to be recommended |
| YC40 | P40 | 13.00-13.40 | 89.5 | 1860 | Suitable for heavy duty cutting of steel and cast steel with a
possible big feed-rate and for face milling as well. |
| YW1 | M10 | 12.85-13.40 | 92.0 | 1380 | Suitable for semi-finishing and finishing of stainless and ordinary
alloyed steel |
| YW2 | M20 | 12.65-13.35 | 91.0 | 1680 | Suitable for semi-finishing and finishing of stainless and low
alloyed steel, mainly used for machining of trains' wheel hubs |
| YW3 | M10 | 12.85-13.10 | 92 | 1420 | It is suitable for semi-finishing and finishing of stainless and
ordinary alloyed steel |
We guarantee:
* We are real factory in Zhuzhou
* Manufactured with100% tungsten carbide raw material
* Comply with ISO 9001:2015 Certification
* Rich experience of over 10 years
* Advanced technology , automatic pressing , HIP sintering
* Full ability to accept OEM & ODM orders
* Strict inspection for quality of raw material and finished
products
For more detail size,pls email us,thanks
